1. Below I have included some drawings and models that should hopefully help you with the dimensions and hole layouts. I included the drawings as p...

2. I forgot to take pictures before I drilled all of the holes but I tried to show them in a way that would explain the step by step approach that...

3. Now to work on the back side. For the 11in tube you will need to cut out the top to allow the top arm to be able to fit into it. This tube only...

4. To be able to adjust the tracking of the belt, the tracking wheel needed to be mounted onto a hinge. I decided to make my own hinge because I ha...

5. To make the upper arm you will need the 7in long piece of 1.5in tube. The 1.5in tubes I had all had a 3/16in wall thickness. This will fit into...

6. To be able to mount this to a surface it needed some feet. I had access to some 2in angle iron so that is what I made these out of. They are all...

7. To make a tool rest for this I needed a long piece of 1.5in tubing to insert into the lower of the two 10in tubes. I determined this needed to b...

8. To make the other tool arm you will need to know what you plan on mounting to it. I was going to mount a flat platen to it so I used the hole lo...

9. I determined I needed a 7in long gas spring to keep the upper arm at the angle I wanted. This is why I ended up making the top of the front plat...

10. There were a couple things that I ran into that I would like to make note of to help you in setting up your grinder. Make sure all the wheels a...